Wires, junctions and meters: naming exercise, US style, sheet 1 of 2
Fig. 1
Name
Meaning
Fig. 2
Name
Meaning
Fig. 3
Name
Meaning
Fig. 4
Name
Meaning
Fig. 5
Name
Meaning
Fig. 6
Name
Meaning
Notes
- Write the name of each symbol, and what it shows, on its lines.
- Write the name of each terminal in its box.
- The answers are on sheet 2.
- Name
- Class
- Date
- Sheet
- 1 of 2
- Drawing
- Wires, junctions and meters Naming exercise
- Style
- US style
- From
- circuitsymbols.com
- Licence
- CC BY 4.0
Wires, junctions and meters: answer key, US style, sheet 2 of 2
Fig. 1
Name Wire junction
In the drawing convention used here, a dot marks a wire connection and a plain four-way crossing without a dot is not connected. Older drawings may use another convention, so check their legend.
Fig. 2
Name Wires crossing, not connected
In the newer convention used here, wires that cross with no dot are not connected. Older schematics drew connected wires as a plain crossing and made unconnected wires hop over each other with a small half-circle, so check a drawing's legend.
Fig. 3
+−Name Voltmeter
A voltmeter is drawn as a circle with a V and is connected across (in parallel with) the part it measures.
Fig. 4
+−Name Ammeter
An ammeter is drawn as a circle with an A and is connected in line with (in series with) the current it measures.
Fig. 5
12Name Lamp
The incandescent-lamp convention used on this sheet is a circle with a cross inside.
Fig. 6
12Name Motor
One common motor convention is a circle containing M; this sheet uses that form.
Notes
- Answer key for sheet 1. The Fig. numbers match the exercise.
- Name
- Class
- Date
- Sheet
- 2 of 2
- Drawing
- Wires, junctions and meters Answer key
- Style
- US style
- From
- circuitsymbols.com
- Licence
- CC BY 4.0